Configuring Hyper-V Virtual Machines

From Virtuatopia
Revision as of 14:15, 16 January 2009 by Neil (Talk | contribs) (New page: Once a Hyper-V virtual machine has been created, there are a number of configuration options which may be modified to alter the behavior of the virtual machine. An overview of the virtual ...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Once a Hyper-V virtual machine has been created, there are a number of configuration options which may be modified to alter the behavior of the virtual machine. An overview of the virtual machine configuration options and details on how to change them are the topic of this chapter.




Accessing Hyper-V Virtual Machine Settings

Hyper-V virtual machine settings are accessed using the Hyper-V Manager tool which may be invoked by selecting Start->Administration Tools->Hyper-V Manager. Within the Hyper-V Manager tool, ensure that the manager is connected to the appropropriate Hyper-V server, right click on the desired virtual machine from the list and select Settings... from the popup menu.

Once loaded, the settings dialog will appear as illustrated in the following figure:


Configuring Hyper-V Virtual Machine Settings



Adding, Removing and Configuring Virtual Hardware Devices

One of the most satisfying aspects of virtualization is the ability to add new hardware devices to a virtual machine, without actually having to purchase and install the physical device. We are, of course, talking about virtual devices. If an additional disk drive is required by the guest operating system, all that needs to be done is to create a new virtual hard disk image file and assign it to the virtual machine. The same is true of virtual network adapters, disk controllers, COM ports and DVD drives.

New virtual hardware devices are added to a virtual machine by selecting the Add Hardware item in the hardware list located in the left hand panel of the settings dialog, selecting the type of device to be added from the list in the main panel and clicking Add'. This will display the device settings page, where the device may be configured to meet the necessary requirements. Clicking Apply will commit the changes.

In the case of new virtual hard disks and DVD drives, the disk controller to which the disk is to be attached must first be selected, followed by the type of device from the main list. More detailed information about adding and configuring Hyper-V virtual hard disks can be found in the chapter entitled Creating and Configuring Hyper-V Virtual Hard Disks (VHDs). In terms of new DVD drive devices, the virtual drive may either be mapped to an existing physical device attached to the host system, or to a CD/DVD ISO image file residing on a host accessible file system.

Devices may be removed from a virtual machine by selecting the device from the hardware list so that the device settings are displayed in the main panel and clicking on the Remove button.

Virtual Machine BIOS Settings

Just like physical computer systems, a virtual machine has a Basic Input Output System (BIOS). As with physical computer systems, the virtual machine BIOS settings may be changed, although the range of options for a virtual machine is considerably considerably narrower than those of a physical BIOS. In fact, the Hyper-V virtual machine BIOS settings are limited to selecting the device from which the guest operating system is to be loaded from when the virtual machine is powered on and choosing whether or not the Num Lock key is on by default:


The Hyper-V Virtual Machine BIOS Settings screen


To raise or lower a device in the boot sequence, select it and move it up and down using the two arrow buttons provided.

Virtual Machine Memory Settings

Virtual machines share the memory of the host system on which Hyper-V is running. This means that the amount of memory allocated to a virtual machine may be increased or reduced. This is achieved by selecting the Memory entry in the hardware list:


Configuring the memory assigned to a Hyper-V Virtual Machine

Any amount of memory may be specified between 8MB and 3069MB. When specifying large amounts of memory, it is important to be aware of the amount of physical memory in the host system and the needs of other virtual machines and applications.

Virtual Machine Processor and Resource Configuration

Virtual machine processor configuration is perhaps one of the more complex areas of configuration. Access to the processor configuration is gained by selecting the Processor item from the hardware list. The processor setting panel will subsequently appear as follows:


Configuring the Processor resources assigned to a Hyper-V Virtual Machine


The Processor section of the settings panel allows the number of virtual processors or processor cores to made available to the virtual machine. Note that this number will be limited the number of physical processors or processor cores on the host system. It is not, for example, possible to allocated four virtual processors to a virtual machine running on a host with only two physical processors.

The Resource Control section of the panel specifies how the physical resources are allocated to the virtual machine:

Virtual Machine Reserve - The percentage of the total resources available to the virtual machine which are guaranteed to be available.

Virtual Machine Limit - The maximum percentage of the total resources available to a virtual machine that may be used.

Relative weight - The percentage of total resources available the virtual machine relative to other virtual machines running on the same host.

Finally, the Limit processor functionality check box allows some of the advanced features of the virtual processors to be hidden from the guest operating system. This is a requirement for running some older operating systems.